Aplicabilidade da captura de movimentos inerciais para avaliar riscos biomecânicos
DOI:
https://doi.org/10.14488/1676-1901.v26i4.5919Palavras-chave:
Ergonomia, Captura de Movimentos, Sensores Inerciais, Indústria 5.0, Tecnologia AssistivaResumo
Na ergonomia, a avaliação precisa de posturas e cargas de trabalho é essencial para diminuir os riscos biomecânicos e reduzir a incidência de lesões musculoesqueléticas. Isso é importante, particularmente para usuários vulneráveis durante a realização de atividade física, como pessoas com ausência de membro superior. Nesse contexto, a utilização de sensores inerciais possibilita a coleta de dados quantitativos, o que complementa a observação direta e favorece a tomada de decisão. Assim, o atual estudo tem como objetivo avaliar os riscos biomecânicos em atividades simuladas, levando em consideração as capacidades e limitações de um usuário com prótese de membro superior, por meio da captura de movimentos inerciais. Quanto à metodologia, o estudo caracteriza-se como aplicado - com abordagem mista e objetivo exploratório. Em relação aos procedimentos técnicos, foi realizado um estudo de caso, tendo a divisão em duas fases, sendo: (i) Pré-coleta e (ii) Avaliação ergonômica por meio do software ScaleFit Industrial Athlete. Para fase (ii) foram avaliadas as atividades de: vestir um casaco, carregar um cesto de roupas e carregar uma mochila. Como resultado, foi possível verificar posturas e ângulos desfavoráveis assumidas pela usuária da coleta, envolvendo variáveis como frequência e valor máximo, unindo a identificação de possíveis riscos com a observação direta de filmagens e comparação com estudos correlatos.
Downloads
Referências
ALIASGARI, R. et al. MOCAP and AI-Based automated physical demand analysis for workplace safety. J. Construct. Eng. Manag., v. 150, n. 7, 04024060, 2024. DOI: https://doi.org/10.1061/JCEMD4.COENG-13811
AMARAL, Daniela Salgado; AMORIM, Brenda Elizabeth Farias de; ROSA, Carolina Schütz; SANGUINETTI, Danielle Carneiro de Menezes; CABRAL, Ana Karina Pessoa da Silva; MERINO, Giselle Schmidt Alves Diaz; MERINO, Eugenio Andrés Díaz. Aplicabilidade da captura de movimentos na pesquisa interdisciplinar de tecnologia assistiva: um relato de experiência. Cadernos Brasileiros de Terapia Ocupacional, v. 28, n. 4, p. 1297-1310, 2020.
ANDREWS, J. R.; HARRELSON, G. L.; WILK, K. Reabilitação Física das Lesões Desportivas. Guanabara Koogan, 2000.
BOURANTANIS, A.; NOMIKOS, N.; WANG, W. Biomechanical Insights in Ancient Greek Combat Sports: A Static Analysis of Selected Pottery Depictions. Sports 2024, 12, 317.
https://doi.org/10.3390/sports12120317
BRASIL. NR17 - Ergonomia. Ministério do Trabalho e Previdência, 2022.
CAEIRO-RODRÍGUEZ, M. et al. Using inertial sensors for the generation of REBA and RULA reports in functional colonoscopy simulations. Ergonomics, v. 69, n. 6, 2026.
CAPPOZZO, A.; CATANI, F.; DELLA CROCE, U.; LEARDINI, A. Position and orientation in space of bones during movement: anatomical frame definition and determination. Clinical Biomechanics, v. 10, n. 4, p. 171–178, 1995.
CARVALHO, F. dos S. et al. Levantamento bibliográfico do mecanismo de desenvolvimento da síndrome do impacto no ombro e sua terapêutica. Research, Society and Development, [S. l.], v. 11, n. 13, p. e489111335746, 2022. DOI: 10.33448/rsd-v11i13.35746. Disponível em: https://rsdjournal.org/rsd/article/view/35746. Acesso em: 12 jul. 2026.
CHAFIQ, M. et al. IMU-Based Detection of Load Carriage for Ergonomic Risk Assessment. In: INTERNATIONAL CONFERENCE ON MOVEMENT AND COMPUTING (MOCO), 10., 2026, Montpellier. Anais... New York: ACM, 2026. DOI: https://doi.org/10.1145/3802842.3802894
CHAN CS, SLAUGHTER SE, JONES CA, WAGG AS. Greater Independence in Activities of Daily Living is Associated with Higher Health-Related Quality of Life Scores in Nursing Home Residents with Dementia. Healthcare (Basel). 2015;3(3):503-518. Published 2015 Jun 30. doi:10.3390/healthcare3030503
CHIASSON, M.-E. et al. Influence of musculoskeletal pain on workers' ergonomic risk-factor assessments. Appl. Ergon., v. 49, p. 1–7, 2015. DOI: https://doi.org/10.1016/j.apergo.2014.12.011.
DAVID, G. C. Ergonomic methods for assessing exposure to risk factors for workrelated musculoskeletal disorders. Occup. Med. (Oxf.), v. 55, n. 3, p. 190–199, 2005. DOI: https://doi.org/10.1093/occmed/kqi082.
DEUTSCHE GESETZLICHE UNFALLVERSICHERUNG (DGUV). Evaluation of physical stresses. Sankt Augustin: Institute for Occupational Safety and Health of the German Social Accident Insurance (IFA), 2015. 10 p. (DGUV Information 208-033, Annex 3).
DEUTSCHE GESETZLICHE UNFALLVERSICHERUNG (DGUV). Evaluation of physical work load in accordance with DGUV Information 208-033 (formerly BGI/GUV-I 7011) (Annex 3). Sankt Augustin: Institute for Occupational Safety and Health of the German Social Accident Insurance (IFA), 2015. Disponível em: https://www.dguv.de/medien/ifa/en/fac/ergonomie/pdf/evaluation_of_physical_work_load.pdf. Acesso em: 9 jul. 2026.
DUARTE, Y. A. O.; ANDRADE, C. L.; LEBRÃO, M. L. O Índex de Katz na avaliação da funcionalidade dos idosos. Rev Esc Enferm Usp, São Paulo, p. 317-325, jun. 2007.
EDEMEKONG PF, BOMGAARS DL, SUKUMARAN S, SCHOO C. Activities of Daily Living. In: StatPearls. Treasure Island (FL): StatPearls Publishing; May 4, 2025.
EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN). Safety of machinery – Human physical performance – Part 4: Evaluation of working postures and movements in relation to machinery (EN 1005-4:2005+A1:2008). Brussels: CEN, 2008.
FAUX-NIGHTINGALE, Alice; PHILP, Fraser; LEONE, Enza; HELLIWELL, Brinton Boreman; PANDYAN, Anand. Exploring stroke survivors’ and physiotherapists’ perspectives of the potential for markerless motion capture technology in community rehabilitation. Journal of NeuroEngineering and Rehabilitation, v. 21, art. 168, p. 1-11, 2024. DOI: https://doi.org/10.1186/s12984-024-01467-x.
FIEDLER, N. C. et al. Avaliação dos limites recomendados de pesos no manuseio de cargas em marcenarias. Cerne, Lavras, v. 14, n. 2, p. 133–140, abr./jun. 2008.
FIEDLER, N. C.; RODRIGUES, T. O.; MEDEIROS, M. B. Avaliação das condições de trabalho, treinamento, saúde e segurança de brigadistas de combate a incêndios florestais em unidades de conservação do Distrito Federal. Revista Árvore, Viçosa, v. 30, n. 1, p. 55-63, fev. 2006.
GARG, A.; MOORE, J. S.; KAPELLUSCH, J. M. The Revised Strain Index: an improved upper extremity exposure assessment model. Ergonomics, v. 60, n. 7, p. 912–922, 2017. DOI: https://doi.org/10.1080/00140139.2016.1237678.
GERMANY. Federal Institute for Occupational Safety and Health (BAuA). Key Indicator Method for assessing and designing physical workloads with respect to manual Lifting, Holding and Carrying of loads ≥ 3 kg (KIM-LHC): draft for practical testing - version 12.5. Dortmund: BAuA/ASER/ArbMedErgo/ebus, 2019. Disponível em: [insira o link, se houver]. Acesso em: 13 jul. 2026.
GONÇALVES, M. Variáveis biomecânicas analisadas durante o levantamento manual de carga. Motriz, Rio Claro, v. 4, n. 2, p. 85–90, dez. 1998.
GUPTA, K. A Review on Ergonomic Studies for Different Industrial Setups. Journal of Research and Practice on the Musculoskeletal System, Joanesburgo, v. 8, n. 3, p. 77-83, set. 2024.
HIGNETT, S.; MCATAMNEY, L. Rapid Entire Body Assessment (REBA). Appl. Ergon., v. 31, n. 2, p. 201–205, 2000. DOI: https://doi.org/10.1016/S0003-6870(99)00039-3.
HOLZGREVE, F. et al. Home office versus ergonomic workstation - is the ergonomic risk increased when working at the dining table? An inertial motion capture based pilot study. BMC Musculoskeletal Disorders, v. 23, art. 745, p. 1-10, 2022.
HUNG, I. Y.-J. et al. The roles of lumbar load thresholds in cumulative lifting exposure to predict disk protrusion in an Asian population. BMC Musculoskeletal Disorders, Londres, v. 21, n. 1, art. 169, 2020. DOI: 10.1186/s12891-020-3167-y. Disponível em: https://pmc.ncbi.nlm.nih.gov/articles/PMC7077115/. Acesso em: 9 jul. 2026.
HUNG, Y.-J. et al. The dose-response relationship between cumulative lifting load and lumbar disk degeneration based on magnetic resonance imaging findings. Physical Therapy, Alexandria, v. 94, n. 11, p. 1582–1593, 2014. DOI: 10.2522/ptj.20130095. Disponível em: https://pubmed.ncbi.nlm.nih.gov/24970094/. Acesso em: 9 jul. 2026.
KAYA, Başak Bilir; GÜNGÖR KETENCI, Pınar; ÖZTEKIN, Özlem; MEMIŞOĞLU, Kemal. The impact of motion capture camera-supported telerehabilitation gamification on upper extremity functions and quality of life in stroke and cerebral palsy patients. Turkish Journal of Physical Medicine and Rehabilitation, v. 71, n. 2, p. 157-166, 2025. DOI: https://doi.org/10.5606/tftrd.2025.16461
KIM JH, LEE SB. Evaluation of Activities of Daily Living: Current Insights and Future Horizons. Ann Geriatr Med Res. 2025;29(2):143-158. doi:10.4235/agmr.24.0172
LAM, W.W.T., TANG, Y.M., FONG, KN.K., 2023. A systematic review of the applica-
tions of markerless motion capture (MMC) technology for clinical measurement in
rehabilitation. J. Neuroeng. Rehabil. 20.
LA TORRE, M. et al. Cálculo das forças internas na coluna lombar pela técnica da dinâmica inversa. Rev. Bras. Cienc. Esporte, Campinas, v. 29, p. 27-43, jan. 2008.
LAVENDER, S. A. et al. A biomechanical evaluation of potential ergonomic solutions for use by firefighter and EMS providers when lifting heavy patients in their homes. Applied Ergonomics, v. 82, 102910, 2020.
LIM, S.; D'SOUZA, C. A narrative review on contemporary and emerging uses of inertial sensing in occupational ergonomics. Int. J. Ind. Ergon., v. 76, 102937, 2020.
LIM, S.; D’SOUZA, C. Statistical prediction of load carriage mode and magnitude from inertial sensor derived gait kinematics. Applied Ergonomics, v. 76, p. 1–11, 2019.
LIND, C. M.; ABTAHI, F.; FORSMAN, M. Wearable motion capture devices for the prevention of work-related musculoskeletal disorders in ergonomics: an overview of current applications, challenges, and future opportunities. Sensors, v. 23, n. 9, 4259, 2023. DOI: https://doi.org/10.3390/s23094259.
LOUREIRO, C. J. Cobots na Indústria 4.0. Tese de Doutorado. 2018.
LU Tung-Wu; CHANG Chu-Fen. Biomechanics of human movement and its clinical applications. The Kaohsiung J of Med Science, 2012;28:S13–25
MARTINS, D.; GOMES, J.; SANTOS, C. A Era do Trabalho 5.0: Be human with smart technology. MBA para Gestores e Engenheiros, p. 241-281, 2019.
MCATAMNEY, L.; NIGEL CORLETT, E. RULA: a survey method for the investigation of work-related upper limb disorders. Appl. Ergon., v. 24, n. 2, p. 91–99, 1993. DOI: https://doi.org/10.1016/0003-6870(93)90080-S.
MEI et al., “Dataset of lower extremity joint angles, moments and forces in distance running,” Heliyon, vol. 8, no. 11, p. e11517, Nov. 2022, doi: 10.1016/j.heliyon.2022.e11517.
MENOSSI, B. R.; BUENO, A. F.; SILVEIRA, S. A.; DALAZEN, A. C. Sugestão de protocolo prático para tratamento de tendinites em ombro. Revista de Humanidades e Ciências Sociais Aplicadas, v. 5, n. 4, p. 3-12, 2007.
MERINO, Giselle et al. Ergonomic evaluation of the musculoskeletal risks in a banana harvesting activity through qualitative and quantitative measures, with emphasis on motion capture (Xsens) and EMG. International Journal of Industrial Ergonomics, [S. l.], v. 69, p. 80–89, Jan. 2019. DOI: https://doi.org/10.1016/j.ergon.2018.10.004.
MERINO, Giselle Schmidt Alves Díaz; PAULO, Irandir Izaquiel; FORCELINI, Franciele; VARNIER, Thiago. O uso da termografia e captura de movimentos para identificação de oportunidades de tecnologias assistivas: um estudo de caso. Ergodesign & HCI, Rio de Janeiro, v. 7, n. especial, p. 64-74, 2019.
MURUGAN, A. S. et al. Optimising computer vision-based ergonomic assessments: sensitivity to camera position and monocular 3D pose model. Ergonomics, v. 68, n. 1, p. 120–137, 2025. DOI: https://doi.org/10.1080/00140139.2024.2304578.
MUTNICK M.E., ENGDAHL S.M., MCKHEEN A., LEE C., GATES D.H. Postural adjustments during activities of daily living with an upper limb prosthesis. Clin Biomech (Bristol). 2026;132:106745. doi:10.1016/j.clinbiomech.2025.106745
NATIONAL INSTITUTE FOR OCCUPATIONAL SAFETY AND HEALTH (NIOSH). Scientific support documentation for the revised 1991 NIOSH lifting equation. Technical Contract Reports, p. 1–282, 1991. Disponível em: https://ntrl.ntis.gov/NTRL/dashboard/searchResults/titleDetail/PB91226274.xhtml.
NORDIN, M.; FRANKEL, V. H. Basic Biomechanics of the Musculoskeletal System. 3. ed. Philadelphia: Lippincott Williams & Wilkins, 2001.
POULTON, E. C. Biases in quantitative judgements. Appl. Ergon., v. 13, n. 1, p. 31-42, 1982.
ROBLES-GARCÍA, V. et al. Spatiotemporal gait patterns during overt and covert evaluation in patients with Parkinson’s disease and healthy subjects: Is there a Hawthorne effect? Journal of Applied Biomechanics, v. 31, n. 3, p. 189–194, 2015. DOI: 10.1123/jab.2013-0319.
PALMERA-SUÁREZ, R.; LÓPEZ-CUADRADO, T.; BROCKHAUS, S. Severity of disability related to road traffic crashes in the Spanish adult population. Accid. Anal. Prev. 2016, 91, 36–42.
PAULO, Irandir Izaquiel; MERINO, Eugenio Andrés Díaz. Aplicabilidade do sistema de captura de movimentos por sensores inerciais (Xsens) para fins ergonômicos: um estudo multicasos. In: CONGRESSO INTERNACIONAL DE ERGONOMIA E USABILIDADE DE INTERFACES HUMANO-TECNOLOGIA, 18.; CONGRESSO INTERNACIONAL DE ERGONOMIA E USABILIDADE DE INTERFACES E INTERAÇÃO HUMANO-COMPUTADOR, 18., 2022, São Paulo. Anais [...] São Paulo: Blucher, 2022. p. 559-574. DOI https://doi.org/10.5151/18ergodesignusihc2022-36.
SALISU, S., RUHAIYEM, N.I.R., EISA, T.A.E., NASSER, M., SAEED, F., YOUNIS, H.A., 2023. Motion capture technologies for ergonomics: a systematic literature review. Diagnostics, 13.
SCALEFIT. Industrial Athlete – the ergonomics measuring system for practical use. Disponível em: https://www.scalefit.de/measurement-system.html. Acesso em: 30 jun. 2026.
SCHALL, M. C.; SESEK, R. F.; CAVUOTO, L. A. Barriers to the adoption of wearable sensors in the Workplace: a Survey of occupational safety and health professionals. Hum. Factors, v. 60, n. 3, p. 351–362, 2018. DOI: https://doi.org/10.1177/0018720817753907.
SEIDLER, A. et al. The role of cumulative physical work load in lumbar spine disease: risk factors for lumbar osteochondrosis and spondylosis associated with chronic complaints. Occupational and Environmental Medicine, Londres, v. 58, n. 11, p. 735–746, 2001. DOI: 10.1136/oem.58.11.735. Disponível em: https://oem.bmj.com/content/58/11/735. Acesso em: 9 jul. 2026.
SLAMA, R. et al. An overview on human-centred technologies, measurements and optimisation in assembly systems. International Journal of Production Research, v. 62, n. 14, p. 5336–5358, 2024.
SOUZA, Beatriz Cavalvanti deet al. FISIOTERAPIA NA PREVENÇÃO DE DOENÇAS OSTEOMUSCULARES EM TRABALHADORES DE INDÚSTRIAS. Revista FT, [S. l.], v. 27, n. 125, p. 1-12, 15 ago. 2023.
THIRUGNANAM, Shanmugapriyan; GURUSAMY, Muralimohan. Markerless Motion Capture for Biomechanical Analysis: A Critical Review of AI Pipelines, Validation and Applications. Results in Engineering, v. 32, 112247, 2026. DOI: https://doi.org/10.1016/j.rineng.2026.112247
TOOMINGAS, A.; ALFREDSSON, L.; KILBOM, A. Possible bias from rating behavior when subjects rate both exposure and outcome. Scand. J. Work Environ. Health, v. 23, n. 5, p. 370–377, 1997.
TRASK, C. et al. Using observation and self-report to predict mean, 90th percentile, and cumulative low back muscle activity in heavy industry workers. Ann. Occup. Hyg., v. 54, n. 5, p. 595–606, 2010. DOI: https://doi.org/10.1093/annhyg/meq011.
WADE, Logan et al. Applications and limitations of current markerless motion capture methods for clinical gait biomechanics. PeerJ, v. 10, e12995, p. 1-27, 25 fev. 2022. DOI: 10.7717/peerj.12995. Disponível em: https://doi.org/10.7717/peerj.12995
WATERS, T. R.; PUTZ-ANDERSON, V.; GARG, A.; FINE, L. J. Revised NIOSH equation for the design and evaluation of manual lifting tasks. Ergonomics, v. 36, n. 7, p. 749–776, 1993. DOI: https://doi.org/10.1080/00140139308967940.
WINTER, David A. Biomechanics and motor control of human movement. 4. ed. Hoboken: John Wiley & Sons, 2009
WORLD HEALTH ORGANIZATION (WHO). Musculoskeletal health. 14 jul. 2022. Disponível em: https://www.who.int/news-room/fact-sheets/detail/musculoskeletal-conditions. Acesso em: 30 jun. 2026.
YANG, Z., SONG, D., Ning, J., Wu, Z., 2024. A systematic review: advancing ergonomic posture risk assessment through the integration of computer vision and machine learning techniques. IEEE Access 12, 180481–180519. https://doi.org/10.1109/access.2024.35094
ZAHABI, S. J. N. et al. Evaluating the accuracy and feasibility of a commercial AI-powered ergonomic assessment system for automotive assembly work. Applied Ergonomics, v. 136, 104779, 2026. DOI: https://doi.org/10.1016/j.apergo.2026.104779.
Publicado
Como Citar
Edição
Seção
Licença
Copyright (c) 2026 Revista Produção Online

Este trabalho está licenciado sob uma licença Creative Commons Attribution 4.0 International License.
A Revista se reserva no direito de efetuar, no artigo publicado, alterações de ordem normativa, ortográfica e gramatical, com vistas a manter o padrão culto da língua, respeitando, porém, o estilo dos autores.
A obra publicada é de inteira responsabilidade do(s) autor(es), cabendo à Revista Produção Online apenas a avaliação da obra, na qualidade de veículo de publicação científica. A Revista Produção Online não se responsabiliza por eventuais violações à Lei nº 9.610/1998, Lei de Direito Autoral.
A revista Produção Online permite que o autor detenha o copyright dos artigos aceitos para publicação, sem restrições.
Esta obra está licenciada sob uma Licença Creative Commons.
