Applicability of inertial motion capture for assessing biomechanical risks

Authors

  • Eugenio Andrés Díaz Merino Universidade Federal de Santa Catarina (UFSC), Florianópolis, SC, Brasil.
  • John Alexander Rey-Galindo Universidade de Guadalajara (UDG), Guadalajara, Jalisco, Brasil. https://orcid.org/0000-0002-0458-7107
  • Felipe Indalêncio Goulart Universidade Federal de Santa Catarina (UFSC), Florianópolis, SC, Brasil. https://orcid.org/0009-0000-1415-2353
  • Arturo Yael Godinez Garcia Universidade de Guadalajara (UDG), Guadalajara, Jalisco, Brasil. https://orcid.org/0009-0003-5015-1245
  • Giselle Schmidt Alves Díaz Merino Universidade do Estado de Santa Catarina (UDESC), Florianópolis, SC, Brasil. https://orcid.org/0000-0003-4085-3561

DOI:

https://doi.org/10.14488/1676-1901.v26i4.5919

Keywords:

Ergonomics, Motion Capture, Inertial Sensors, Industry 5.0, Assistive Technology

Abstract

Accurate assessment of working postures and physical workloads is essential in ergonomics to reduce biomechanical risks and prevent work-related musculoskeletal disorders. This is particularly important for vulnerable users during physical activity, such as individuals with upper limb absence. In this context, the use of inertial sensors enables the collection of quantitative data, complementing direct observation and supporting decision-making. Therefore, this study aims to assess biomechanical risks in simulated activities by considering the capabilities and limitations of an upper-limb prosthesis user through inertial motion capture. Methodologically, the study is characterized as applied research with a mixed-methods approach and an exploratory objective. Regarding the technical procedures, a case study was conducted in two phases: (i) pre-data collection and (ii) ergonomic assessment using the ScaleFit Industrial Athlete software. In phase (ii), the following activities were evaluated: putting on a jacket, carrying a laundry basket, and carrying a backpack. The findings enabled the identification of unfavorable postures and joint angles adopted by the participant, considering variables such as frequency and maximum values. These quantitative results were integrated with direct observation of video recordings and compared with related studies to identify potential biomechanical risks.

Downloads

Download data is not yet available.

Author Biographies

Eugenio Andrés Díaz Merino, Universidade Federal de Santa Catarina (UFSC), Florianópolis, SC, Brasil.

Desenhista Industrial (UFRJ). Doutor e Mestre em Engenharia de Produção (UFSC). Atualmente é professor titular da Universidade Federal de Santa Catarina e coordena o Núcleo de Gestão de Design e o Laboratório de Design e Usabilidade. Com uma abordagem Interprofissional vem desenvolvendo atividades integradas entre Design, Engenharia e Saúde, (iDES) e áreas afins. Atualmente coordena o programa de pós-graduação em Design (CAPES), é professor permanente do programa de pós-graduação em Engenharia de Produção (CAPES) e recentemente foi chefe do Departamento de Gestão, Mídias e Tecnologia (UFSC). Dentre os principais temas de atuação está a gestão de design, ergonomia, produtos, processos, serviços, tecnologia assistiva e sistemas complexos, desenvolvendo projetos junto a empresas e parcerias interinstitucionais no Brasil e exterior, com ênfase em tecnologia (instrumentação tecnológica). É presidente do Fórum de Programas de pós-graduação em Design e professor convidado em várias instituições nacionais e internacionais.

John Alexander Rey-Galindo, Universidade de Guadalajara (UDG), Guadalajara, Jalisco, Brasil.

Designer industrial pela Universidad Jorge Tadeo Lozano (UJTL) (Colômbia), mestre em Design Industrial com ênfase em Ergonomia pela Universidad Nacional Autónoma de México (UNAM) (México) e doutorando em Saúde Pública pela Universidad de Guadalajara (UdeG) (México). Atualmente, atua como docente na graduação e na pós-graduação da Universidad de Guadalajara (México) e como professor convidado da Universidad de Concepción (Chile). É pesquisador nas áreas de design e ergonomia para a inclusão. Integra o Centro de Investigaciones en Ergonomía da Universidad de Guadalajara. É autor de artigos científicos e capítulos de livros nas áreas de ergonomia, design e inclusão. Atua como orientador de projetos e consultor em ergonomia, design e inclusão.

Felipe Indalêncio Goulart, Universidade Federal de Santa Catarina (UFSC), Florianópolis, SC, Brasil.

Doutorando no programa de pós-graduação em Design da Universidade Federal de Santa Catarina (UFSC) e Pesquisador do Núcleo de Gestão de Design e Laboratório de Design e Usabilidade (NGD/LDU). Mestre em Design pela Universidade Federal de Santa Catarina (UFSC) e Bacharel em Design Industrial pela Universidade do Estado de Santa Catarina (UDESC).

Arturo Yael Godinez Garcia, Universidade de Guadalajara (UDG), Guadalajara, Jalisco, Brasil.

Engenheiro Biomédico com experiência em Pesquisa e Desenvolvimento (P&D) em startups de tecnologia em saúde. Atualmente, é mestrando em Ergonomia na Universidade de Guadalajara. Suas áreas de atuação incluem o desenvolvimento de próteses e órteses, aliado a abordagens de acessibilidade ergonômica. Sua pesquisa concentra-se na interação humano-tecnologia, com foco no desenvolvimento de dispositivos assistivos inovadores e inclusivos que contribuam para a melhoria da qualidade de vida dos usuários.

Giselle Schmidt Alves Díaz Merino, Universidade do Estado de Santa Catarina (UDESC), Florianópolis, SC, Brasil.

Professora do Departamento de Design da Universidade do Estado de Santa Catarina (UDESC), atuando nos cursos de graduação em Design (Industrial e Gráfico) e coordenadora do Programa de Pós-Graduação em Design. É também professora permanente do Programa de Pós-graduação em Design da Universidade Federal de Santa Catarina (UFSC). Pesquisadora Bolsista de Produtividade do CNPq (PQ B) na área de Design. Foi coordenadora e membro titular do Comitê de Assessoramento de Design (CA-DI) do CNPq e recebeu o Prêmio CAPES de Tese (2020) como orientadora (AUD). Suas pesquisas e orientações (da graduação ao pós-doutorado) concentram-se em Gestão de Design, Design e Saúde, Design Centrado no Ser Humano, Tecnologia Assistiva e Design Universal/Inclusivo. Integra redes como RPDTA e RLBDI, mantendo parcerias nacionais (UFPE, UFPB, UNIFEI, UEAP, UEPA) e internacionais (Espanha, Portugal e México).

References

ALIASGARI, R. et al. MOCAP and AI-Based automated physical demand analysis for workplace safety. J. Construct. Eng. Manag., v. 150, n. 7, 04024060, 2024. DOI: https://doi.org/10.1061/JCEMD4.COENG-13811

AMARAL, Daniela Salgado; AMORIM, Brenda Elizabeth Farias de; ROSA, Carolina Schütz; SANGUINETTI, Danielle Carneiro de Menezes; CABRAL, Ana Karina Pessoa da Silva; MERINO, Giselle Schmidt Alves Diaz; MERINO, Eugenio Andrés Díaz. Aplicabilidade da captura de movimentos na pesquisa interdisciplinar de tecnologia assistiva: um relato de experiência. Cadernos Brasileiros de Terapia Ocupacional, v. 28, n. 4, p. 1297-1310, 2020.

ANDREWS, J. R.; HARRELSON, G. L.; WILK, K. Reabilitação Física das Lesões Desportivas. Guanabara Koogan, 2000.

BOURANTANIS, A.; NOMIKOS, N.; WANG, W. Biomechanical Insights in Ancient Greek Combat Sports: A Static Analysis of Selected Pottery Depictions. Sports 2024, 12, 317.

https://doi.org/10.3390/sports12120317

BRASIL. NR17 - Ergonomia. Ministério do Trabalho e Previdência, 2022.

CAEIRO-RODRÍGUEZ, M. et al. Using inertial sensors for the generation of REBA and RULA reports in functional colonoscopy simulations. Ergonomics, v. 69, n. 6, 2026.

CAPPOZZO, A.; CATANI, F.; DELLA CROCE, U.; LEARDINI, A. Position and orientation in space of bones during movement: anatomical frame definition and determination. Clinical Biomechanics, v. 10, n. 4, p. 171–178, 1995.

CARVALHO, F. dos S. et al. Levantamento bibliográfico do mecanismo de desenvolvimento da síndrome do impacto no ombro e sua terapêutica. Research, Society and Development, [S. l.], v. 11, n. 13, p. e489111335746, 2022. DOI: 10.33448/rsd-v11i13.35746. Disponível em: https://rsdjournal.org/rsd/article/view/35746. Acesso em: 12 jul. 2026.

CHAFIQ, M. et al. IMU-Based Detection of Load Carriage for Ergonomic Risk Assessment. In: INTERNATIONAL CONFERENCE ON MOVEMENT AND COMPUTING (MOCO), 10., 2026, Montpellier. Anais... New York: ACM, 2026. DOI: https://doi.org/10.1145/3802842.3802894

CHAN CS, SLAUGHTER SE, JONES CA, WAGG AS. Greater Independence in Activities of Daily Living is Associated with Higher Health-Related Quality of Life Scores in Nursing Home Residents with Dementia. Healthcare (Basel). 2015;3(3):503-518. Published 2015 Jun 30. doi:10.3390/healthcare3030503

CHIASSON, M.-E. et al. Influence of musculoskeletal pain on workers' ergonomic risk-factor assessments. Appl. Ergon., v. 49, p. 1–7, 2015. DOI: https://doi.org/10.1016/j.apergo.2014.12.011.

DAVID, G. C. Ergonomic methods for assessing exposure to risk factors for workrelated musculoskeletal disorders. Occup. Med. (Oxf.), v. 55, n. 3, p. 190–199, 2005. DOI: https://doi.org/10.1093/occmed/kqi082.

DEUTSCHE GESETZLICHE UNFALLVERSICHERUNG (DGUV). Evaluation of physical stresses. Sankt Augustin: Institute for Occupational Safety and Health of the German Social Accident Insurance (IFA), 2015. 10 p. (DGUV Information 208-033, Annex 3).

DEUTSCHE GESETZLICHE UNFALLVERSICHERUNG (DGUV). Evaluation of physical work load in accordance with DGUV Information 208-033 (formerly BGI/GUV-I 7011) (Annex 3). Sankt Augustin: Institute for Occupational Safety and Health of the German Social Accident Insurance (IFA), 2015. Disponível em: https://www.dguv.de/medien/ifa/en/fac/ergonomie/pdf/evaluation_of_physical_work_load.pdf. Acesso em: 9 jul. 2026.

DUARTE, Y. A. O.; ANDRADE, C. L.; LEBRÃO, M. L. O Índex de Katz na avaliação da funcionalidade dos idosos. Rev Esc Enferm Usp, São Paulo, p. 317-325, jun. 2007.

EDEMEKONG PF, BOMGAARS DL, SUKUMARAN S, SCHOO C. Activities of Daily Living. In: StatPearls. Treasure Island (FL): StatPearls Publishing; May 4, 2025.

EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN). Safety of machinery – Human physical performance – Part 4: Evaluation of working postures and movements in relation to machinery (EN 1005-4:2005+A1:2008). Brussels: CEN, 2008.

FAUX-NIGHTINGALE, Alice; PHILP, Fraser; LEONE, Enza; HELLIWELL, Brinton Boreman; PANDYAN, Anand. Exploring stroke survivors’ and physiotherapists’ perspectives of the potential for markerless motion capture technology in community rehabilitation. Journal of NeuroEngineering and Rehabilitation, v. 21, art. 168, p. 1-11, 2024. DOI: https://doi.org/10.1186/s12984-024-01467-x.

FIEDLER, N. C. et al. Avaliação dos limites recomendados de pesos no manuseio de cargas em marcenarias. Cerne, Lavras, v. 14, n. 2, p. 133–140, abr./jun. 2008.

FIEDLER, N. C.; RODRIGUES, T. O.; MEDEIROS, M. B. Avaliação das condições de trabalho, treinamento, saúde e segurança de brigadistas de combate a incêndios florestais em unidades de conservação do Distrito Federal. Revista Árvore, Viçosa, v. 30, n. 1, p. 55-63, fev. 2006.

GARG, A.; MOORE, J. S.; KAPELLUSCH, J. M. The Revised Strain Index: an improved upper extremity exposure assessment model. Ergonomics, v. 60, n. 7, p. 912–922, 2017. DOI: https://doi.org/10.1080/00140139.2016.1237678.

GERMANY. Federal Institute for Occupational Safety and Health (BAuA). Key Indicator Method for assessing and designing physical workloads with respect to manual Lifting, Holding and Carrying of loads ≥ 3 kg (KIM-LHC): draft for practical testing - version 12.5. Dortmund: BAuA/ASER/ArbMedErgo/ebus, 2019. Disponível em: [insira o link, se houver]. Acesso em: 13 jul. 2026.

GONÇALVES, M. Variáveis biomecânicas analisadas durante o levantamento manual de carga. Motriz, Rio Claro, v. 4, n. 2, p. 85–90, dez. 1998.

GUPTA, K. A Review on Ergonomic Studies for Different Industrial Setups. Journal of Research and Practice on the Musculoskeletal System, Joanesburgo, v. 8, n. 3, p. 77-83, set. 2024.

HIGNETT, S.; MCATAMNEY, L. Rapid Entire Body Assessment (REBA). Appl. Ergon., v. 31, n. 2, p. 201–205, 2000. DOI: https://doi.org/10.1016/S0003-6870(99)00039-3.

HOLZGREVE, F. et al. Home office versus ergonomic workstation - is the ergonomic risk increased when working at the dining table? An inertial motion capture based pilot study. BMC Musculoskeletal Disorders, v. 23, art. 745, p. 1-10, 2022.

HUNG, I. Y.-J. et al. The roles of lumbar load thresholds in cumulative lifting exposure to predict disk protrusion in an Asian population. BMC Musculoskeletal Disorders, Londres, v. 21, n. 1, art. 169, 2020. DOI: 10.1186/s12891-020-3167-y. Disponível em: https://pmc.ncbi.nlm.nih.gov/articles/PMC7077115/. Acesso em: 9 jul. 2026.

HUNG, Y.-J. et al. The dose-response relationship between cumulative lifting load and lumbar disk degeneration based on magnetic resonance imaging findings. Physical Therapy, Alexandria, v. 94, n. 11, p. 1582–1593, 2014. DOI: 10.2522/ptj.20130095. Disponível em: https://pubmed.ncbi.nlm.nih.gov/24970094/. Acesso em: 9 jul. 2026.

KAYA, Başak Bilir; GÜNGÖR KETENCI, Pınar; ÖZTEKIN, Özlem; MEMIŞOĞLU, Kemal. The impact of motion capture camera-supported telerehabilitation gamification on upper extremity functions and quality of life in stroke and cerebral palsy patients. Turkish Journal of Physical Medicine and Rehabilitation, v. 71, n. 2, p. 157-166, 2025. DOI: https://doi.org/10.5606/tftrd.2025.16461

KIM JH, LEE SB. Evaluation of Activities of Daily Living: Current Insights and Future Horizons. Ann Geriatr Med Res. 2025;29(2):143-158. doi:10.4235/agmr.24.0172

LAM, W.W.T., TANG, Y.M., FONG, KN.K., 2023. A systematic review of the applica-

tions of markerless motion capture (MMC) technology for clinical measurement in

rehabilitation. J. Neuroeng. Rehabil. 20.

LA TORRE, M. et al. Cálculo das forças internas na coluna lombar pela técnica da dinâmica inversa. Rev. Bras. Cienc. Esporte, Campinas, v. 29, p. 27-43, jan. 2008.

LAVENDER, S. A. et al. A biomechanical evaluation of potential ergonomic solutions for use by firefighter and EMS providers when lifting heavy patients in their homes. Applied Ergonomics, v. 82, 102910, 2020.

LIM, S.; D'SOUZA, C. A narrative review on contemporary and emerging uses of inertial sensing in occupational ergonomics. Int. J. Ind. Ergon., v. 76, 102937, 2020.

LIM, S.; D’SOUZA, C. Statistical prediction of load carriage mode and magnitude from inertial sensor derived gait kinematics. Applied Ergonomics, v. 76, p. 1–11, 2019.

LIND, C. M.; ABTAHI, F.; FORSMAN, M. Wearable motion capture devices for the prevention of work-related musculoskeletal disorders in ergonomics: an overview of current applications, challenges, and future opportunities. Sensors, v. 23, n. 9, 4259, 2023. DOI: https://doi.org/10.3390/s23094259.

LOUREIRO, C. J. Cobots na Indústria 4.0. Tese de Doutorado. 2018.

LU Tung-Wu; CHANG Chu-Fen. Biomechanics of human movement and its clinical applications. The Kaohsiung J of Med Science, 2012;28:S13–25

MARTINS, D.; GOMES, J.; SANTOS, C. A Era do Trabalho 5.0: Be human with smart technology. MBA para Gestores e Engenheiros, p. 241-281, 2019.

MCATAMNEY, L.; NIGEL CORLETT, E. RULA: a survey method for the investigation of work-related upper limb disorders. Appl. Ergon., v. 24, n. 2, p. 91–99, 1993. DOI: https://doi.org/10.1016/0003-6870(93)90080-S.

MEI et al., “Dataset of lower extremity joint angles, moments and forces in distance running,” Heliyon, vol. 8, no. 11, p. e11517, Nov. 2022, doi: 10.1016/j.heliyon.2022.e11517.

MENOSSI, B. R.; BUENO, A. F.; SILVEIRA, S. A.; DALAZEN, A. C. Sugestão de protocolo prático para tratamento de tendinites em ombro. Revista de Humanidades e Ciências Sociais Aplicadas, v. 5, n. 4, p. 3-12, 2007.

MERINO, Giselle et al. Ergonomic evaluation of the musculoskeletal risks in a banana harvesting activity through qualitative and quantitative measures, with emphasis on motion capture (Xsens) and EMG. International Journal of Industrial Ergonomics, [S. l.], v. 69, p. 80–89, Jan. 2019. DOI: https://doi.org/10.1016/j.ergon.2018.10.004.

MERINO, Giselle Schmidt Alves Díaz; PAULO, Irandir Izaquiel; FORCELINI, Franciele; VARNIER, Thiago. O uso da termografia e captura de movimentos para identificação de oportunidades de tecnologias assistivas: um estudo de caso. Ergodesign & HCI, Rio de Janeiro, v. 7, n. especial, p. 64-74, 2019.

MURUGAN, A. S. et al. Optimising computer vision-based ergonomic assessments: sensitivity to camera position and monocular 3D pose model. Ergonomics, v. 68, n. 1, p. 120–137, 2025. DOI: https://doi.org/10.1080/00140139.2024.2304578.

MUTNICK M.E., ENGDAHL S.M., MCKHEEN A., LEE C., GATES D.H. Postural adjustments during activities of daily living with an upper limb prosthesis. Clin Biomech (Bristol). 2026;132:106745. doi:10.1016/j.clinbiomech.2025.106745

NATIONAL INSTITUTE FOR OCCUPATIONAL SAFETY AND HEALTH (NIOSH). Scientific support documentation for the revised 1991 NIOSH lifting equation. Technical Contract Reports, p. 1–282, 1991. Disponível em: https://ntrl.ntis.gov/NTRL/dashboard/searchResults/titleDetail/PB91226274.xhtml.

NORDIN, M.; FRANKEL, V. H. Basic Biomechanics of the Musculoskeletal System. 3. ed. Philadelphia: Lippincott Williams & Wilkins, 2001.

POULTON, E. C. Biases in quantitative judgements. Appl. Ergon., v. 13, n. 1, p. 31-42, 1982.

ROBLES-GARCÍA, V. et al. Spatiotemporal gait patterns during overt and covert evaluation in patients with Parkinson’s disease and healthy subjects: Is there a Hawthorne effect? Journal of Applied Biomechanics, v. 31, n. 3, p. 189–194, 2015. DOI: 10.1123/jab.2013-0319.

PALMERA-SUÁREZ, R.; LÓPEZ-CUADRADO, T.; BROCKHAUS, S. Severity of disability related to road traffic crashes in the Spanish adult population. Accid. Anal. Prev. 2016, 91, 36–42.

PAULO, Irandir Izaquiel; MERINO, Eugenio Andrés Díaz. Aplicabilidade do sistema de captura de movimentos por sensores inerciais (Xsens) para fins ergonômicos: um estudo multicasos. In: CONGRESSO INTERNACIONAL DE ERGONOMIA E USABILIDADE DE INTERFACES HUMANO-TECNOLOGIA, 18.; CONGRESSO INTERNACIONAL DE ERGONOMIA E USABILIDADE DE INTERFACES E INTERAÇÃO HUMANO-COMPUTADOR, 18., 2022, São Paulo. Anais [...] São Paulo: Blucher, 2022. p. 559-574. DOI https://doi.org/10.5151/18ergodesignusihc2022-36.

SALISU, S., RUHAIYEM, N.I.R., EISA, T.A.E., NASSER, M., SAEED, F., YOUNIS, H.A., 2023. Motion capture technologies for ergonomics: a systematic literature review. Diagnostics, 13.

SCALEFIT. Industrial Athlete – the ergonomics measuring system for practical use. Disponível em: https://www.scalefit.de/measurement-system.html. Acesso em: 30 jun. 2026.

SCHALL, M. C.; SESEK, R. F.; CAVUOTO, L. A. Barriers to the adoption of wearable sensors in the Workplace: a Survey of occupational safety and health professionals. Hum. Factors, v. 60, n. 3, p. 351–362, 2018. DOI: https://doi.org/10.1177/0018720817753907.

SEIDLER, A. et al. The role of cumulative physical work load in lumbar spine disease: risk factors for lumbar osteochondrosis and spondylosis associated with chronic complaints. Occupational and Environmental Medicine, Londres, v. 58, n. 11, p. 735–746, 2001. DOI: 10.1136/oem.58.11.735. Disponível em: https://oem.bmj.com/content/58/11/735. Acesso em: 9 jul. 2026.

SLAMA, R. et al. An overview on human-centred technologies, measurements and optimisation in assembly systems. International Journal of Production Research, v. 62, n. 14, p. 5336–5358, 2024.

SOUZA, Beatriz Cavalvanti deet al. FISIOTERAPIA NA PREVENÇÃO DE DOENÇAS OSTEOMUSCULARES EM TRABALHADORES DE INDÚSTRIAS. Revista FT, [S. l.], v. 27, n. 125, p. 1-12, 15 ago. 2023.

THIRUGNANAM, Shanmugapriyan; GURUSAMY, Muralimohan. Markerless Motion Capture for Biomechanical Analysis: A Critical Review of AI Pipelines, Validation and Applications. Results in Engineering, v. 32, 112247, 2026. DOI: https://doi.org/10.1016/j.rineng.2026.112247

TOOMINGAS, A.; ALFREDSSON, L.; KILBOM, A. Possible bias from rating behavior when subjects rate both exposure and outcome. Scand. J. Work Environ. Health, v. 23, n. 5, p. 370–377, 1997.

TRASK, C. et al. Using observation and self-report to predict mean, 90th percentile, and cumulative low back muscle activity in heavy industry workers. Ann. Occup. Hyg., v. 54, n. 5, p. 595–606, 2010. DOI: https://doi.org/10.1093/annhyg/meq011.

WADE, Logan et al. Applications and limitations of current markerless motion capture methods for clinical gait biomechanics. PeerJ, v. 10, e12995, p. 1-27, 25 fev. 2022. DOI: 10.7717/peerj.12995. Disponível em: https://doi.org/10.7717/peerj.12995

WATERS, T. R.; PUTZ-ANDERSON, V.; GARG, A.; FINE, L. J. Revised NIOSH equation for the design and evaluation of manual lifting tasks. Ergonomics, v. 36, n. 7, p. 749–776, 1993. DOI: https://doi.org/10.1080/00140139308967940.

WINTER, David A. Biomechanics and motor control of human movement. 4. ed. Hoboken: John Wiley & Sons, 2009

WORLD HEALTH ORGANIZATION (WHO). Musculoskeletal health. 14 jul. 2022. Disponível em: https://www.who.int/news-room/fact-sheets/detail/musculoskeletal-conditions. Acesso em: 30 jun. 2026.

YANG, Z., SONG, D., Ning, J., Wu, Z., 2024. A systematic review: advancing ergonomic posture risk assessment through the integration of computer vision and machine learning techniques. IEEE Access 12, 180481–180519. https://doi.org/10.1109/access.2024.35094

ZAHABI, S. J. N. et al. Evaluating the accuracy and feasibility of a commercial AI-powered ergonomic assessment system for automotive assembly work. Applied Ergonomics, v. 136, 104779, 2026. DOI: https://doi.org/10.1016/j.apergo.2026.104779.

Published

2026-11-16

How to Cite

Merino, E. A. D., Rey-Galindo, J. A., Goulart, F. I., Garcia, A. Y. G., & Merino, G. S. A. D. (2026). Applicability of inertial motion capture for assessing biomechanical risks. Revista Produção Online, 26(4), 5919. https://doi.org/10.14488/1676-1901.v26i4.5919

Issue

Section

Papers

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)