Sustainable value stream mapping, circular economy, and triple bottom line
a case study in a brazilian printing company
DOI:
https://doi.org/10.14488/1676-1901.v26i4.4885Keywords:
Circular economy, Lean green, Printing industry, Sus-VSM, Triple bottom lineAbstract
Small and medium-sized enterprises (SMEs) struggle to establish efficient operations that balance economic, environmental, and social performance. This study aims to apply the sustainable value stream mapping (Sus-VSM) integrated with circular economy principles (3R hierarchy) and the triple bottom line (TBL) in a Brazilian small printing facility. Methodologically, this research is classified as applied, descriptive-exploratory, and qualitative, carried out through a single case study. Empirical procedures comprised on-site participant observation, direct timing of cycle and setup operations, inventory quantification, and the administration of the physical load index (PLI) questionnaire alongside occupational hazard assessments. Data analysis and improvement planning were conducted using Sus-VSM, Ishikawa diagram, and a 5W1H action framework. The findings highlighted a significant gap between value-added processing time (67 seconds) and total manufacturing lead time (62.3 days), primarily driven by intermediate work-in-progress inventories. The printing department exhibited the highest ergonomic strain (PLI = 43.812), whereas high-speed machinery represented the critical safety hazard. The Ishikawa analysis demonstrated that social impacts were the most prevalent, accounting for 56% of total mapped adverse effects, followed by financial (24%) and environmental (20%) impacts. As a practical contribution, a three-phase implementation roadmap and 20 multidimensional performance indicators were established for operational monitoring.
Downloads
References
ABREU, M.F.; ALVES, A.C.; MOREIRA, F. Lean-Green models for eco-efficient and sustainable production. Energy, v. 137, p. 846-853, 2017.
ALCALDE-CALONGE, A.; RUIZ-PALOMINO, P.; SÁEZ-MARTÍNEZ, F. J. Fostering circular economy in small and medium-sized enterprises: The role of social capital, adaptive capacity, entrepreneurial orientation and a pro-sustainable environment. Business Strategy and the Environment, v. 33, n. 4, p. 3948-3965, 2024.
ALVES, J.R.X.; ALVES, J. Production management model integrating the principles of lean manufacturing and sustainability supported by the cultural transformation of a company. International Journal of Production Research. v. 53, n. 17, p. 5320-5333, 2015.
BELHADI, A.; TOURIKI, F. E.; EL FEZAZI, S. Benefits of adopting lean production on green performance of SMEs: a case study. Production Planning & Control, v. 29, n. 11, p. 873-894, 2018.
BHATTACHARYA, A.; NAND, A.; CASTKA, P. Lean-green integration and its impact on sustainability performance: A critical review. Journal of Cleaner Production, v. 236, p. 117697-117712, 2019.
BUSH, A. et al. Investigating lean methodology for energy efficient manufacturing. Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World: IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014, Proceedings, Part II. Springer Berlin Heidelberg, p. 508-517, 2014.
CHOUDHARY, S. et al. An integrated lean and green approach for improving sustainability performance: a case study of a packaging manufacturing SME in the UK. Production planning & control, v. 30, n. 5-6, p. 353-368, 2019.
ELKINGTON, J.; ROWLANDS, I.H. Cannibals with forks: The triple bottom line of 21st century business. Alternatives Journal, v. 25, n. 4, p. 42-43, 1999.
FAULKNER, W.; BADURDEEN, F. Sustainable Value Stream Mapping (Sus-VSM): methodology to visualize and assess manufacturing sustainability performance. Journal of cleaner production, v. 85, p. 8-18, 2014.
FERCOQ, A.; LAMOURI, S.; CARBONE, V. Lean/Green integration focused on waste reduction techniques. Journal of Cleaner production, v. 137, p. 567-578, 2016.
FERREIRA, C. C. R. A.; SCAVARDA, A.; REIS, A. C. Metrics for measuring industrial sustainability performance in small and medium-sized enterprises. International Journal of Productivity and Performance Management, v. 73, n. 11, p. 46-68, 2023.
GANDHI, N.S.; THANKI, S.J.; THAKKAR, J.J. Ranking of drivers for integrated lean-green manufacturing for Indian manufacturing SMEs. Journal of Cleaner Production, v. 171, p. 675-689, 2018.
GARCÍA, C.; LEONE, I.; WILLIAMS, E. Buenas Prácticas Ambientales em Industrias Gráficas y Afines. Unión Gráfica Argentina Regional, Rosario, p. 11-31, 2014.
GARZA-REYES, J.A. et al. A PDCA-based approach to environmental value stream mapping (E-VSM). Journal of Cleaner Production, v. 180, p. 335-348, 2018.
GARZA-REYES, J.A. Lean and green–a systematic review of the state of the art literature. Journal of Cleaner Production, v. 102, p. 18-29, 2015.
GARZA-REYES, J.A. et al. Lean and green–synergies, differences, limitations, and the need for Six Sigma. In: Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World: IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014, Proceedings, Part II. Springer Berlin Heidelberg, 2014. P. 71-81.
GHISELLINI, P.; CIALANI, C.; ULGIATI, S. A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems. Journal of Cleaner production, v. 114, p. 11-32, 2016.
GOVINDAN, K.; DIABAT, A.; SHANKAR, K.M. Analyzing the drivers of green manufacturing with fuzzy approach. Journal of Cleaner Production, v. 96, p. 182-193, 2015. DOI: https://doi.org/10.1016/j.jclepro.2014.02.054
HAAS, W. et al. How circular is the global economy?: An assessment of material flows, waste production, and recycling in the European Union and the world in 2005. Journal of industrial ecology, v. 19, n. 5, p. 765-777, 2015.
HARTINI, S.; CIPTOMULYONO, U.; ANITYASARI, M. Manufacturing sustainability assessment using a lean manufacturing tool: A case study in the Indonesian wooden furniture industry. International Journal of Lean Six Sigma, v. 11, n. 5, p. 943-971, 2020.
HOLLMANN, S. et al. Validation of a questionnaire for assessing physical work load. Scandinavian journal of work, environment & health, v. 25, n. 2, p. 105-114, 1999.
JAREBRANT, C. et al. ErgoVSM: a tool for integrating value stream mapping and ergonomics in manufacturing. Human Factors and Ergonomics in Manufacturing & Service Industries, v. 26, n. 2, p. 191-204, 2016.
KIRCHHERR, J.; REIKE, D.; HEKKERT, M. Conceptualizing the circular economy: An analysis of 114 definitions. Resources, conservation and recycling, v. 127, p. 221-232, 2017.
KIURSKI, J. et al. The impact factors of the environmental pollution and workers health in printing industry. Proceedings of world academy of science, engineering and technology, V. 6, p. 755-758, 2012.
KORHONEN, J. et al. Circular economy as an essentially contested concept. Journal of cleaner production, v. 175, p. 544-552, 2018.
KULIGOVSKI, C. et al. 5S and 5W2H Tools Applied to Research Laboratories: Experience from Instituto Carlos Chagas-FIOCRUZ/PR for Cell Culture Practices. Brazilian Archives of Biology and Technology, v. 64, 2021.
KURDVE, M.; BELLGRAN, M. Green lean operationalization of the circular economy concept on production shop floor level. Journal of Cleaner Production, v. 278, p. 123223-123234, 2021.
MACHADO, M.C; VIVALDINI, M.; DE OLIVEIRA, O.J. Production and supply-chain as the basis for SMEs’ environmental management development: A systematic literature review. Journal of Cleaner Production, v. 273, p. 123141, 2020.
MIGUEL, P.A.C. Estudo de caso na engenharia de produção: estruturação e recomendações para sua condução. Production, v. 17, p. 216-229, 2007.
MÜLLER, E.; STOCK, T.; SCHILLIG, R. Energy Value-Stream Mapping-A Method to Optimize Value-Streams in Respect of Time and Energy Consumption. In: Enabling Manufacturing Competitiveness and Economic Sustainability: Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013), Munich, Germany, October 6th-9th, 2013. Springer International Publishing, p. 285-290, 2014.
NOWICKA, K.; BENTKOWSKA, K. Circular economy from companies and consumers perspectives: toward value co-creation. Economics and Environment, v. 90, n. 3, p. 788-811, 2024.
OHNO, T. Toyota production system: beyond large-scale production. Crc Press, 1988.
SAJAN, M.P.; SHALIJ, P.R.; RAMESH, A. Lean manufacturing practices in Indian manufacturing SMEs and their effect on sustainability performance. Journal of Manufacturing Technology Management, v. 28, n. 6, p. 772-793, 2017.
SHARMA, A.; KUMAR, D.; ARORA, N. An integrated Lean production-sustainability framework for evaluation and improvement of the performance of pharmaceutical factory. Journal of Cleaner Production, v. 370, p. 133502, 2022.
TEIXEIRA P.C.A. et al. Combining lean and green practices to achieve a superior performance: The contribution for a sustainable development and competitiveness -An empirical study on the Portuguese context. Corporate Social Responsibility and Environmental Management, v. 29, n. 4, p. 887-903, 2022.
TEIXEIRA, P. et al. Connecting lean and green with sustainability towards a conceptual model. Journal of Cleaner Production, v. 322, p. 129047-129062, 2021.
THANKI, S.; GOVINDAN, K.; THAKKAR, J. An investigation on lean-green implementation practices in Indian SMEs using analytical hierarchy process (AHP) approach. Journal of Cleaner Production, v. 135, p. 284-298, 2016.
VILLALOBOS, G, et al. Environmental impact assessment of a graphic company that uses offset lithographic printing. Uniciencia, v. 35, n. 1, p. 367-383, 2021.
VINODH, S.; BEN, R.; ASOKAN, P. Life cycle assessment integrated value stream mapping framework to ensure sustainable manufacturing: a case study. Clean Technologies and Environmental Policy, v. 18, p. 279-295, 2016.
WOMACK, J.P.; JONES, D.T. Lean thinking:banish waste and create wealth in your corporation. Journal of the Operational Research Society, v. 48, n. 11, p. 1148-1148, 1997.
WONG, W.P.; WONG, K.Y. Synergizing an ecosphere of lean for sustainable operations. Journal of Cleaner Production, v. 85, p. 51-66, 2014.
YIN, R. K. Case study research and applications: Design and methods. 6th ed. Thousand Oaks, CA: SAGE Publications, 2018.
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Revista Produção Online

This work is licensed under a Creative Commons Attribution 4.0 International License.
The Journal reserves the right to make spelling and grammatical changes, aiming to keep a default language, respecting, however, the style of the authors.
The published work is responsibility of the (s) author (s), while the Revista Produção Online is only responsible for the evaluation of the paper. The Revista Produção Online is not responsible for any violations of Law No. 9.610 / 1998, the Copyright Act.
The journal allows the authors to keep the copyright of accepted articles, without restrictions
This work is licensed under a Creative Commons License .
