Mapeamento do fluxo de valor e uso da simulação integrada lean com sistemas ciber-físicos em uma indústria de embalagens flexíveis

Autores

  • Danilo Ribamar Sá Ribeiro Universidade Federal de Santa Catarina
  • Mariele Canal Bonfante Universidade Federal de Santa Catarina
  • Enzo Morosini Frazzon Universidade Federal de Santa Catarina
  • Fernando Antônio Forcellini Universidade Federal de Santa Catarina

DOI:

https://doi.org/10.14488/1676-1901.v19i1.3363

Palavras-chave:

Mapeamento do Fluxo de Valor. Análise baseada Simulação. Lean. CPS.

Resumo

A utilização conjunta de MFV e Simulação tem ganhando cada vez mais espaço, apresentando-se como ferramentas essenciais ao contribuir com a proposição de novos cenários para facilitar a implementação de melhorias, apoiada pela difusão de tecnologias de informação e pela contínua adoção dos conceitos de Sistemas Ciber-Físicos (CPS). Nesse contexto, esta pesquisa teve como objetivo propor e analisar, por meio da aplicação da ferramenta de Mapeamento de Fluxo de Valor e simulação, a adoção de CPS no fluxo de uma linha de produção de bobina de filme laminado, considerada como produto mais representativo no volume de produção de uma empresa produtora de embalagens flexíveis. Ademais, compara-se o cenário do Estado Atual da linha e um cenário do Estado Futuro de integração Lean com CPS, que foram construídos com o auxílio do software SIMIO®. Os resultados mostraram que a integração das ferramentas de simulação de produção e do MFV permitiram desenvolver um modelo virtual de produção, que além de representar o fluxo real da produção é capaz de analisar cenários de otimização das operações da manufatura, bem como apresenta as vantagens da adoção de sistemas inteligentes na linha produtiva.

Downloads

Não há dados estatísticos.

Referências

ABDULMALEK, F.A.; RAJGOPAL, J. Analyzing the benefits of Lean manufacturing and value stream mapping via simulation: a process sector case study. International Journal of Production Economics, v. 107, n. 1, p. 223-236, 2007. DOI: http://dx.doi.org/doi:10.1016/j.ijpe.2006.09.009

BANKS, J. Handbook of simulation: principles, methodology, advances, applications and practice. New York: John Wiley & Sons, Inc., 1998.

BANKS, J.; CARSON, J.S.; NELSON, B.L.; NICOL, D.M. Discrete-event system simulation. 3 ed. New Jersey: Prentice-Hall, 2000.

BENEDETTINI, O.; TJAHJONO, B. Towards an improved tool to facilitate simulation modelling of complex manufacturing systems. The International Journal of Advanced Manufacturing Technology, v. 43, n. 1-2, p. 191-199, 2009. DOI: https://doi.org/10.1007/s00170-008-1686-z

BERTRAND, J.W.M.; FRANSOO, J.C. Operations management research methodologies using quantitative modeling. International Journal of Operations & Production Management, v. 22, n. 2, p. 241-264, 2002. DOI: https://doi.org/10.1108/01443570210414338

BONAMIGO, A; PAIMELL, F. A.; ARBUGERI, L. A. Implementação do VSM por meio do Conceito Toyota Kata. In: CONGRESSO BRASILEIRO DE ENGENHARIA DE PRODUÇÃO, 6., 2017. Anais... Ponta Grossa, PR, 2017.

BONFANTE, M.C. Mapeamento de fluxo de valor como método para a manufatura sustentável: pesquisa-ação em uma empresa produtora de embalagens flexíveis. Dissertação (Mestrado) – Programa de Pós-Graduação em Engenharia Mecânica – POSMEC, Universidade Federal de Santa Catarina – UFSC, Florianópolis, 2016.

BRETTEL, M.; BRETTEL, M.; FRIEDERICHSEN, N.; KELLER, M.; ROSENBERG, M. How virtualization, decentralization and network building change the manufacturing landscape: An Industry 4.0 Perspective. International Journal of Mechanical, Industrial Science and Engineering, v. 8, n. 1, p. 37-44, 2014.

BROWN, A.; AMUNDSON, J.; BADURDEEN, F. Sustainable value stream mapping (Sus-VSM) in different manufacturing system configurations: application case studies. Journal of Cleaner Production, v. 85, p. 164-179, 2014. DOI: https://doi.org/10.1016/j.jclepro.2014.05.101

CHWIF, L.; MEDINA, A. C. Modelagem e simulação de eventos discretos: teoria e aplicações. 2. ed. São Paulo: Editora dos Autores, 2010.

CORREA, J.E.; MELLO, C.H.P.; PEREIRA, T.F. Uso de simulação de eventos discretos para avaliação de uma linha de montagem de uma empresa do ramo automotivo e os impactos do fator humano. Revista Científica e-Locução, v. 1, n. 6, 2015.

DAL FORNO, A.J.; PEREIRA, F.A.; FORCELLINI, F.A.; KIPPER, L.M. Value Stream Mapping: a study about the problems and challenges found in the literature from the past 15 years about application of Lean tools. The International Journal of Advanced Manufacturing Technology, v. 72, n. 5-8, p. 779-790, 2014. DOI: http://dx.doi.org/10.1007/s00170-014-5712-z

DE SOUZA, T.A.A. CARVALHO, E.R., MELO, A.C.S.; NUNES, D.R.L. Simulação e Lean Thinking como ferramentas para gestão de processos: uma avaliação de diferentes alternativas ao aumento da capacidade em uma empresa de cabos elétricos de alumínio. GEPROS: Gestão da Produção, Operações e Sistemas, v. 9, n. 4, p. 125, 2014. DOI: https://doi.org/10.15675/gepros.v9i4.1133

DONATELLI, A.; HARRIS, G. Combining value stream mapping and discrete event simulation. In: Proceedings of the Huntsville Simulation Conference. By the Society for Modeling and Simulation International, San Diego, CA., 2004.

EROL, S.; SCHUMACHER, A.; SIHN, W. Strategic guidance towards Industry 4.0–a three-stage process model. In: International conference on competitive manufacturing. 2016.

FURIAN, N.; O’SULLIVAN, M.; WALKER, C.; VÖSSNER, S.; NEUBACHER, D. A conceptual modeling framework for discrete event simulation using hierarchical control structures. Simulation modelling practice and theory, v. 56, p. 82-96, 2015. DOI: https://doi.org/10.1016/j.simpat.2015.04.004

GREASLEY, A. Using process mapping and business process simulation to support a process-based approach to change in a public sector organization. Technovation, n. 26, p.95-103, 2006. DOI: https://doi.org/10.1016/j.technovation.2004.07.008

GURUMURTHY, A.; KODALI, R. Design of Lean manufacturing systems using value stream mapping with simulation: a case study. Journal of Manufacturing Technology Management, v. 22, n. 4, p. 444-473, 2011. DOI: http://dx.doi.org/10.1108/17410381111126409

HARRELL, C.; GHOSH, B.K.; BOWDEN, R.O. Simulation using promodel. Boston: McGraw-Hill, 2011.

HERNANDEZ-MATIAS, J.C.; VIZAN, A.; PEREZ-GARCIA, J; RIOS, J. An integrated modelling framework to support manufacturing system diagnosis for continuous improvement. Robotics and computer-integrated manufacturing, v. 24, n. 2, p. 187-199, 2008. DOI: https://doi.org/10.1016/j.rcim.2006.10.003

JAMMES, F.; SMIT, H. Service-oriented paradigms in industrial automation. IEEE Transactions on industrial informatics, v. 1, n. 1, p. 62-70, 2005.

KAIHARA, T.; KATSUMURA, Y.; SUGINISHI, Y.; KADAR, B. Simulation model study for manufacturing effectiveness evaluation in crowdsourced manufacturing. CIRP Annals, v. 66, n. 1, p. 445–448, 2017.

KAPPES, J.J. Aplicação dos conceitos de manufatura enxuta na produção de bens de capital sob encomenda: um estudo de caso de um produto do setor metal mecânico. Florianópolis: UFSC. Dissertação (Mestrado) – Programa de Pós-Graduação em Engenharia Mecânica – POSMEC, Universidade Federal de Santa Catarina – UFSC, Florianópolis, 2011.

KOLBERG, D.; ZÜHLKE, D. Lean automation enabled by industry 4.0 technologies. IFAC-PapersOnLine, v. 48, n. 3, p. 1870-1875, 2015. DOI: https://doi.org/10.1016/j.ifacol.2015.06.359

KUMAR, S.; PHROMMATHED, P. Improving a manufacturing process by mapping and simulation of critical operations. Journal of Manufacturing Technology Management, v. 17, n. 1, p. 104-132, 2006. DOI: https://doi.org/10.1108/17410380610639533

LAW, A.M. Simulation-models level of detail determines effectiveness. Industrial engineering, v. 23, n. 10, p. 16-&, 1991.

LAW, A.M.; MCCOMAS, MG. Simulation of manufacturing systems. In: Simulation Conference Proceedings, 1998. Winter. IEEE, 1998. p. 49-52.

LEE, E.A. Cyber physical systems: design challenges. In: Object oriented real-time distributed computing (isorc), 11th IEEE International Symposium on (pp. 363-369). IEEE, 2008.

LEE, E.A. Cyber-physical systems-are computing foundations adequate. In: Position paper for nsf workshop on cyber-physical systems: Research Motivation, Techniques and Roadmap. 2006. p. 1-9.

LEE, J.; BAGHERI, B.; KAO, H. A cyber-physical systems architecture for industry 4.0-based manufacturing systems. Manufacturing Letters, v. 3, p. 18-23, 2015. DOI: https://doi.org/10.1016/j.mfglet.2014.12.001

LIMA, D.F.S.; ALCANTARA, P.G.; SANTOS, L.C.; SILVA, L.M.F.; DA SILVA, R. M. Mapeamento do fluxo de valor e simulação para implementação de práticas Lean em uma empresa calçadista. Revista Produção Online, v. 16, n. 1, p. 366, 2016. DOI: https://doi.org/10.14488/1676-1901.v16i1.2183

MASCARENHAS, S.A. Metodologia científica. Ed. Pearson. São Paulo: 2012.

MCDONALD, T.; VAN AKEN, E.M.; RENTES, A.F. Utilising simulation to enhance value stream mapping: a manufacturing case application. International Journal of Logistics, v. 5, n. 2, p. 213-232, 2002. DOI: http://dx.doi.org/10.1080/13675560210148696

MELLO, M.F.; PAVAN, L.A. Análise de tempos e métodos no setor de embalagem em uma empresa produtora de erva-mate. Engevista, v. 19, n. 5, p. 1198-1212, 2017. DOI: https://doi.org/10.22409/engevista.v19i5.956

MIHRAM, D.; MIHRAM, G.A. Human knowledge the role of models, metaphors, and analogy. International Journal of General System, v. 1, n. 1, p. 41-60, 1974. DOI: https://doi.org/10.1080/03081077408960747

MITROFF, I.I.; BETZ, F.; PONDY, L.R.; SAGASTI, F. On managing science in the system age: two schemas for the study of science as a whole system phenomenon. Interfaces, v.4, n.3, p.46-58, 1974. DOI: https://doi.org/10.1287/inte.4.3.46

MONTEVECHI, J.A.B.; LEAL, F.; PINHO, A.F.; COSTA, R.F.S.; OLIVEIRA, M.L.M.; SILVA, A.L.F. Conceptual modeling in simulation projects by mean adapted IDEF: an application in a Brazilian tech company. In: Winter Simulation Conference. Proceedings... Baltimore, MD, USA, 2010.

MOURTZIS, D.; PAPAKOSTAS, N.; MAVRIKIOS, D.; MAKRIS, S.; ALEXOPOULOS, K. The role of simulation in digital manufacturing: applications and outlook. International journal of computer integrated manufacturing, v. 28, n. 1, p. 3-24, 2015. DOI: https://doi.org/10.1080/0951192X.2013.800234

MURAYAMA, R.C.B.; RESTON FILHO, J.C.; CARDOSO, M.A.P. Aplicação do Lean Manufacturing e estruturação da Indústria 4.0 em uma linha de baterias para smartphone. In: ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇÃO. 37., 2017. Anais.. Joinville, 2017.

OLIVEIRA, R.B.M.; CORRÊA, V.A.; NUNES, L.E.N.P. Mapeamento do fluxo de valor em um modelo de simulação computacional. Revista Produção Online, v. 14, n. 3, p. 837-861, 2014. DOI: http://dx.doi.org/10.14488/1676-1901.v14i3.1461

PEGDEN, C.D.; STURROCK, D.T. Rapid modeling solutions: introduction to simulation and Simio. Simio Forward Thinking, 2014.

RITZMAN, L.P.; KRAJEWSKI, L.J. Administração da produção. São Paulo: Prentice Hall, 2004.

ROBINSON, S. Conceptual modelling for simulation Part I: definition and requirements. Journal of the operational research society, v. 59, n. 3, p. 278-290, 2008. DOI: https://doi.org/10.1057/palgrave.jors.2602368

ROTHER, M; SHOOK, J. Aprendendo a Enxegar: mapeando o fluxo de valor para agregar valor e eliminar o desperdício. São Paulo: Lean Institute Brasil, 2003.

RUIZ, N. An intelligent simulation environment for manufacturing systems. Computers & Industrial Engineering, v. 76, n. Supplement C, p. 148–168, 2014. DOI: https://doi.org/10.1016/j.cie.2014.06.013

SANDERS, A.; ELANGESWARAN, C.; WULFSBERG, J. Industry 4.0 implies Lean manufacturing: research activities in industry 4.0 function as enablers for Lean manufacturing. Journal of Engineering and Management, v. 9, n. 3, p. 811-833, 2016. DOI: http://dx.doi.org/10.3926/jiem.1940

SARGENT, R.G. Verification and validation of simulation models. Journal of simulation, v. 7, n. 1, p. 12-24, 2013. DOI: https://doi.org/10.1057/jos.2012.20

SHARARAH, M.A.; EL-KILANY, K.S.; EL-SAYED, A. E. Component bas

zed modeling and simulation of value stream mapping for lean production systems. In: FAIM Conference. 2010. p. 881-888.

SIBATROVA, S.V.; VISHNEVSKIY, K. Present and future of the production: integrating lean management into corporate foresight. 2016.

SILVA, C.E.S.; SALGADO, E.G.; MELLO, C.H.P.; SILVA OLIVEIRA, E.; LEAL, F. Integration of computer simulation in design for manufacturing and assembly. International Journal of Production Research, v. 52, n. 10, p. 2851-2866, 2014. DOI: https://doi.org/10.1080/00207543.2013.853887

SILVA, G.F. Procedimento para análise de sistemas de produção compartilhada utilizando otimização baseada em simulação. Dissertação (Mestrado) - Universidade Federal de Santa Catarina – UFSC, Programa de Pós-graduação em Engenharia de Produção. Florianópolis, 2017.

SILVA, T.M. Mapeamento do fluxo de valor e simulação a eventos discretos para a redução de desperdícios em uma família de peças usinadas em uma empresa do setor automotivo. Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-graduação em Engenharia Mecânica, Florianópolis, 2013.

SINGH, B.; GARG, S.K.; SHARMA, S.K. Value stream mapping: literature review and implications for Indian industry. The International Journal of Advanced Manufacturing Technology, v. 53, n. 5-8, p. 799-809, 2011. DOI: http://dx.doi.org/10.1007/s00170-010-2860-7

SLACK, N., CHAMBERS S., JOHNSTON R. Administração da produção. São Paulo: Atlas, 2009.

SMEW, W.; YOUNG, P.; GERAGHTY, J. Supply chain analysis using simulation, Gaussian process modelling and optimisation. International Journal of Simulation Modelling, v. 12, n. 3, p. 178-189, 2013. DOI: http://dx.doi.org/10.2507/IJSIMM12(3)4.239

SOLDING, P.; GULLANDER, P. Concepts for simulation based value stream mapping. In: Simulation Conference (WSC), Proceedings of the 2009 Winter. IEEE, 2009. p. 2231-2237.

TANG, D. et al. Using autonomous intelligence to build a smart shop floor. The International Journal of Advanced Manufacturing Technology, v. 94, n. 5-8, p. 1597-1606, 2018. DOI: https://doi.org/10.1007/s00170-017-0459-y

TAYLOR, J.R. Introdução à análise de erros: o estudo de incertezas em medições físicas. Porto Alegre. Bookman, 2012.

TORTORELLA, G.L.; FETTERMAN, D.; GIGLIO, R.; BORGES, G. A. Implementação da Produção Enxuta e Indústria 4.0 em Empresas Brasileiras de Manufatura. Revista Empreender e Inovar, v. 1, n. 1, p. 1-18, 2018.

WANG, L.; TÖRNGREN, M.; ONORI, M. Current status and advancement of cyber-physical systems in manufacturing. Journal of Manufacturing Systems, v. 37, p. 517-527, 2015. DOI: https://doi.org/10.1016/j.jmsy.2015.04.008

WOLF, W. Cyber-physical systems. Computer, v. 42, n. 3, p. 88-89, 2009. DOI: https://doi.org/10.1109/MC.2009.81

WOLLMANN, D. Analytic Hierachy Process suportando a avaliação por pares. Revista Diálogo Educacional, v. 17, n. 52, p. 503-523, 2017. DOI: http://dx.doi.org/10.7213/1981-416X.17.052.DS09

Publicado

15-03-2019

Como Citar

Sá Ribeiro, D. R., Bonfante, M. C., Frazzon, E. M., & Forcellini, F. A. (2019). Mapeamento do fluxo de valor e uso da simulação integrada lean com sistemas ciber-físicos em uma indústria de embalagens flexíveis. Revista Produção Online, 19(1), 346–374. https://doi.org/10.14488/1676-1901.v19i1.3363

Edição

Seção

Artigos